BMW 325i/328i/330i 1998-2006 (AT/MT) - MFactory 1.5/2.0 Way Metal Plate LSD, For Final Ratio less than 3.07

BMW 325i/328i/330i 1998-2006 (AT/MT), in which the transmission ratio is less than 3.07:1 and the height of the differential, measured from the side of the disc wheel, which is then approx. 47.5mm, then this lock fits this rear and the car. When the height measured from the side of the differential disc wheel is approx. 54.5mm, you should then select a suitable lock for this model from the link below. The BMW 188K rear structure is in newer models and is smaller in physical dimensions, where the differential lock of the older 188 rear does not fit, not to mention the rear clearance itself, whose pinion shaft is different and shorter. The BMW 188K rear is in the following car models with a transmission ratio of less than 3.07:1: We ask that you check the car serial number of the gear ratio or by opening the tail and counting the number of teeth on the pinion shaft and the ring gear and dividing the number of teeth. Similarly, you can measure the height of the differential measured from the side of the disc wheel, which in this case is approx. 47.5mm, then this lock will go to the rear and to the car. BMW E46, E82, E88, E90, E92, E93, F22, F23, F30, F32, F33, F34 and F36