Bolt distribution 5 x 108, center hole 65.1mm Total length measured from the front side of the wheel mounting flange shown in the picture 7300mm (from the back side 7150mm) -wheel mounting flange and standard length wheel bolts -stern mounting flange -outer seal/step -inner seal/stefa 38x65x8 (next to the crimp sleeve to drive shaft, which is usually implemented like this 740/940, can also be directly on the crimp sleeve) -bearing - crimp sleeve -drive shaft NOTE! This Volvo 740/940 drive shaft does not fit the Volvo 240 rear axle (the Volvo 240 rear axle is approx. 100mm narrower overall), because one drive shaft is 50mm longer and the 27 tooth spline is not enough even if it is shortened by 50mm from the end!)
